Bio-, sewage- & landfill gas flares  |  Gas compressor systems  |  Container systems

  • LowTemperatureFlare NTF

  • MediumTemperatureFlare MTU

  • HighTemperatureFlare HTF

  • SpecialFlares in Modules

  • Compressor

  • Biomethan Combustion Facilities

  • Landfill-gas Technology

  • Compresssor Stations

LowTemperatureFlare NTF

NTF
The series NTF serves as a start-up and emergency flare - according to „TA-Luft“ with open burning. It fits especially for thermal disposal of surplus combustible gases - which occur in biogas, sewage gas and landfill gas plants - and is used with various special gases as well.
The flares are available with DVGW-tested 1 or 2-stage gas valve engine with a gas flow rate of 50-2000Nm3/h. If higher gas flow rates are required, we are happy to produce special flares or combined modules for you.
The flare burner starts when the start signal and the gas pressure due for flare. The burner control unit controls the electric ignition and automatically monitors the flame during operation. All control functions are housed in a weather-resistant and ready to connect control box.
All wetted parts are fabricated from V4A steel, blasted and passivated.
Ignition systems: Direct ignition with high voltage electrodes and accordingly ignition burner starting with NTF 750.
Technical details NTF
Main features of the NTF
 Optional
  • open and homogeneous burning > 850°C
  • Compliance rule “TA-Luft”
  • Standardized according to EN746
  • Low-maintenance operation
  • Two-step main gas valve
  • Wind- or view protection pipe
  • Ignition burner for starting
  • Flare length according to customer wish
... and a lot more!
Contact us. Our technicians will help you!

MiddleTemperatureFlare MTU

The series MTU serves as a start-up and emergency flare - according to „TA-Luft“ with concealed burning. It fits especially for thermal disposal of surplus combustible gases - which occur in biogas, sewage gas and landfill gas plants - and is used with various special gases as well.

 

The flares are available with DVGW-tested 1 or 2-stage gas valve engine with a gas flow rate of 50-2000Nm3/h. If higher gas flow rates are required, we are happy to produce special flares or combined modules for you.

The MTU series is available with or without ATEX-approved compressor.
 
The flare burner starts when the start signal and the gas pressure due for flare. The burner control unit controls the electric ignition automatically and monitors the flame during operation.

All control functions are housed in a weather-resistant and ready to connect control box.

All wetted parts are fabricated from V4A steel, blasted and passivated.

Ignition systems: Direct ignition with high voltage electrode and accordingly ignition burner.

Technical details MTU
Main features of the MTU
 Optional
  • Concealed and homogeneous burning > 850°C
  • Low noise design
  • Standardized according to EN746
  • Low-mentainenance operation
  • Covering of the fittings
  • Heating Unit
  • Ignition burner for starting operation
  • Flare according to customer wish

HighTemperatureFlare HTF

The series HTF serves as a operation flare - according to „TA-Luft“ with automatic exhaust gas temperature control to 1000°C and a duration time of at least 0.3 sec. It fits especially for thermal disposal of surplus combustible gases - which result in landfill gas plants - and is used with various special gases as well.

The flares are available with DVGW-tested 1 or 2-stage gas valve engine with a gas flow rate of 50-1500Nm3/h.
HTF-flares are supplied with a heat-resistant ceramic insulation (up to 1220 ° C) of the burning chamber and an automatically controlled air-inlet.


The flare burner starts when the start signal and the gas pressure due for flare. The burner control unit controls the electric ignition automatically and monitors the temperature during operation.

All control functions are housed in a weather-resistant and ready to connect control box.

All wetted parts are fabricated from V4A steel, blasted and passivated.

Ignition systems: Ignition burner for propane-, natural gas- and special gases.

Technical details HTF
Main features of the HTF
 Optional
  • Concealed burning < 1000°C
  • Duration time 0.3 sec (“TA-Luft”)
  • Isolated bunrning chamber
  • Standardized according to  EN746
  • Two-step main gas valve
  • Stainless-steel switchboard
  • Continuous power regulation
  • Flare length according to customer wish

...and a lot more!

SpecialFlares in Modular Construction

No gas is to hot for us!
Technical innovations, test-appliances and special requests - our technicians will turn your ideas into practice.
Take advantage of our experience with special gases such as bio-methane, wood-, synthethic-, flash-, pyrolysis gas and hydrogen and similar.We help you to save your money - you can use our special flares to burn off more gases within one station. Double costs are cosequently a thing of the past!

Our technicians will assist you in the selection of various engineering processes and burning systems including the complete control- and regulatory technology - from the planning to the start-up.

The extensive product range includes mobile gas-flares with integrated gas compressor and intake-press monitoring.

Ignition systems: Direct ignition with high voltage electrode and accordingly ignition burner.
Possible fields of use
 Optional
  • Bivalent flares
  • Wood gas flares
  • Geothermal
  • Synthesis gas
  • Pyrolysis gas
  • Sewage gas
  • Flashgas
  • Heat value adaption with weak gases by admixture of natural gas or propane.
  • Heat extraction for emergency heating.
  • Mobile flares for biogas plants.

Gas compressor GVD

The gas compressor serves as a booster fan for biogas, natural gas and various special gases. Specifically it is characterized by a simple, maintenance-free construction.


By the cat. ATEX II 2G the gas compressor GVD is also suitable for extracting of explosive gas mixtures.

 

The precision-balanced aluminum rotor is driven directly by a corrosion-resistant stainless steel shaft. The shaft is sealed with a double lip seal and is lubricated with an automatic lubricator.
A very energy efficient use of the compressor is made possible by a speed control by frequency.

Technical details GVD

Main features of the GVD

  • Wide volume stream range with a constant output pressure (flat level-identity line)
  • Ignition-free sources and permanently techn. thight design implementation
  • Insensitive to wet gases

 

Optional


  • Connection flange according to customer wish
  • Automatic drainage
  • Case position and rotation direction according to customer wish
  • Temperatur monitoring

Biomethan combustion facilities

Example: special flare NTF6x2000 in Germany:


This facility serves to safely dispose of biogas and biomethane utilizing a single burner system, which consists of a twelve-stage burner device and the necessary ancillaries. Further configurations can be offered on request.


All parts, which are subjected to contact with the particular mediums, are manufactured from stainless steel, welded, pickled and passivated. Each burner head has its own ignition burner and UV flame monitoring. The facility is controlled by a superordinate system.

Technical details biomethan combustion facilities

Landfill gas stations

We support you with pleasure! Starting from project planning up to the introduction of your fully automatic landfill gas stations.
Based on the pre-commissioning made in our factory - if requested with safety standards authority decrease and certification - the introduction of the compressor station becomes shorter on site for approx. 2 days.
Main characteristics of the landfill gas stations
  • Power Range of 150 - 6000Nm3/h
  • Fully automatic control
  • Data recording and transmission
  • Low-maintenance design
 Optional
  • Regulatory criteria as specified
  • FRemote maintenance
  • Design as CDM/JI-Projects
  • Integrated gas flare
  • Integrated control of the CHP
  • Gas cooling and conditioning
  • Activated carbon filter for CHP
  • Service contract according to customer wish

Compressor stations

Compressor stations are either available in turn-key container design or as a module for installation in existing plants.
Our compressor stations raise gas pressure in the outgoing pipe with a volume stream from up to 2500Nm3 / h on a pressure level from up to 160 mbar. The heart of every compressor station is our low-maintenance, ATEX certified centrifugal compressor GVD.
Due to the shallow curve of the compressor, a stable output pressure is ensured by varying operating conditions
Possible fields of use
  • Biogas stations
  • Micro gas networks
  • Natural gas stations
  • BHKW stations
Optional
  • Special version (ATEX)
  • Gas analysis
  • Gas alarm system
  • Remote maintenance
  • for EX-Zone 1 or 2
  • Speed control with frequency converter
  • Customer-specific design